Where Sump and Ejector Pumps Show Up Around Sacramento
Most homes here are built on slabs or over crawlspaces, not basements. So if you’ve moved from the Midwest or East Coast, you may not see a sump pump in every house. That doesn’t mean they never come up. These are the situations where we install them most:
- Crawlspaces that hold standing water after winter storms
- Homes on low lots where groundwater rises in a wet year
- Bathrooms, laundry rooms or bars built below the level of the sewer line
- ADUs and garage conversions set lower than the main sewer connection
- Older homes with a cellar or partial basement
- Commercial buildings with below-grade rooms or elevator pits
Sump Pump Installation and Repair
A sump pump sits in a pit, or sump basin, at the lowest point of a crawlspace or below-grade room. When water rises in the pit, a float switch turns the pump on and it pushes the water out and away from the house.
Sump Pump Installation
We set the basin at the low point, install a pump sized for the water you get, and add a check valve so water doesn’t run back in. The discharge line is routed away from your foundation to a spot where local rules allow it. Standing water under a house can lead to mold, wood rot and pests, so getting it out matters.
Sump Pump Repair
The most common sump pump failure is a stuck or tangled float switch. Others include a worn motor, a clogged intake, a failed check valve and a frozen or blocked discharge line. We test the pump, fix what’s wrong and replace it if the motor is done.
Battery Backups
Storms that bring the most water also knock out power. A battery backup pump takes over when the main pump loses power or can’t keep up. We install backup systems alongside your main pump and show you how to test them.
Sewage Ejector Pumps
A sewage ejector pump moves wastewater uphill. If a toilet, shower or sink sits lower than the sewer line, gravity can’t carry it away, so it drains into a sealed basin. When the basin fills, the ejector pump grinds or pushes the waste up into the main sewer line.
We see these most in ADUs, garage conversions and below-grade bathrooms. If you’re planning one of those projects, we can design the pump system as part of your new construction plumbing. For existing systems, watch for these warning signs:
- A high-water alarm going off
- Sewage odor near the basin or the fixtures it serves
- Slow drains or backups in the lower bathroom
- The pump running constantly or not at all
- Gurgling or loud grinding noises
How We Handle Pump Work
Sometimes a pump is not the answer. A backup in a lower bathroom can be a clogged line instead of a bad ejector, and our drain cleaning service clears it. If the problem is further out, we may check the sewer line. We find the real cause before we sell you a pump.
Our process is the same on every job: we come out, give you a free estimate on site, get your approval, do the work, test everything to make sure it works properly and close you out. Most new installs carry a one-year warranty on leaks and labor, and you can qualify for financing right from your estimate. If water is rising or sewage is backing up, call us. We take emergency calls every day, Sundays included.
Call 2 Brothers Plumbing
Whether it’s water under the house or a bathroom below the sewer line, a properly sized and installed pump keeps your home dry and working. We’ll tell you what you need and do it right the first time.
Call 2 Brothers Plumbing at (916) 997-6370 or request your free estimate. Check our coupons page for current offers.